led tv protector image
Alec
I have two 19 inch led tvs-lg and samsung.
samsung is showing high interference (bit error rate)-with strong signal strength.
The lg is pefect.
Even when i used a splitter the samsung showed interference while the lg still had a perfect signal.
Why is this?
Answer
Do you have any carbon florescent light bulbs plugged into the same outlet as the TV? That can cause interference in some sets. Here is a list of tools you can use to combat interference.
F-Type connectors: F-Type connectors provide the most secure connection between cables and wall sockets than your older type RF connector. They also provide better shielding against interference, and therefore you will find F-type sockets on Foxtel boxes, Modems, and in almost all brand new apartment complexes
RG-6 Antenna Cable: RG-6 antenna cable is a visibly thicker type of antenna/coax cable than the older common thin aerial cables, which are known as RG59. RG-6 cables have a much thicker aluminium braid wrapping inside which helps block out nearby interference.
Digital TV Amplifier: This product is ideal for situations where you want to operate two TVs from one antenna. If you use a cheaper splitter, this situation often results with the two TVs receiving a lower quality signal, but if you use an amplified splitter (like Kingray for example) it boosts the signal so you don't lose any quality.
Passive Splitters: Passive splitters can come in a many forms, but generally they are all designed to let you split the signal from one aerial to a couple or more Television sets. Doing this however, will weaken the signal strength, so it's best avoided. If you are forced to use a splitter, you might need a powered splitter as we spoke about above.
Isolator: These commonly come in the form of surge power boards, and they protect your electrical appliances from atmospheric disturbances, spikes, surges and line noise. Even the small power fluctuations that occur every day can be harmful to the long-term life of electronics, so investing in a surge protector can help keep you appliances operating smoothly for longer.
Do you have any carbon florescent light bulbs plugged into the same outlet as the TV? That can cause interference in some sets. Here is a list of tools you can use to combat interference.
F-Type connectors: F-Type connectors provide the most secure connection between cables and wall sockets than your older type RF connector. They also provide better shielding against interference, and therefore you will find F-type sockets on Foxtel boxes, Modems, and in almost all brand new apartment complexes
RG-6 Antenna Cable: RG-6 antenna cable is a visibly thicker type of antenna/coax cable than the older common thin aerial cables, which are known as RG59. RG-6 cables have a much thicker aluminium braid wrapping inside which helps block out nearby interference.
Digital TV Amplifier: This product is ideal for situations where you want to operate two TVs from one antenna. If you use a cheaper splitter, this situation often results with the two TVs receiving a lower quality signal, but if you use an amplified splitter (like Kingray for example) it boosts the signal so you don't lose any quality.
Passive Splitters: Passive splitters can come in a many forms, but generally they are all designed to let you split the signal from one aerial to a couple or more Television sets. Doing this however, will weaken the signal strength, so it's best avoided. If you are forced to use a splitter, you might need a powered splitter as we spoke about above.
Isolator: These commonly come in the form of surge power boards, and they protect your electrical appliances from atmospheric disturbances, spikes, surges and line noise. Even the small power fluctuations that occur every day can be harmful to the long-term life of electronics, so investing in a surge protector can help keep you appliances operating smoothly for longer.
Why does my TV blink off when my minifridge clicks off?
Daniel G
I have a 37" LED tv and a small kenmore minifridge plugged into a surge protector. When the fridge clicks off, my TV image goes black for a second then comes back, but it only happens when I'm on the PS3, never happens when I'm using my xbox360. I don't mind it as long as it's not doing any permanent damage to anything, but is there a way to stop it from happening altogether?
Answer
You said you wanted to stop it all together. Are you using an extension cord? The longer the worse. Is it a heavy duty appliance cord? Better a heavy duty cord, if you must. If a surge occurs, the suppressor will short and blow the breaker on the outlet strip? Since you didn't mention this, nothing major has happened Yet. If any appliance, including an outlet strip has/ had a grounding plug, it must be connected. Do not use a 2 wire extension cord, or a 3 prong adaptor. Can you plug the fridge into another outlet, maybe another wall?
You said you wanted to stop it all together. Are you using an extension cord? The longer the worse. Is it a heavy duty appliance cord? Better a heavy duty cord, if you must. If a surge occurs, the suppressor will short and blow the breaker on the outlet strip? Since you didn't mention this, nothing major has happened Yet. If any appliance, including an outlet strip has/ had a grounding plug, it must be connected. Do not use a 2 wire extension cord, or a 3 prong adaptor. Can you plug the fridge into another outlet, maybe another wall?
Powered by Yahoo! Answers
Title Post: What is causing the interference on the samsung tv?
Rating: 98% based on 988 ratings. 5 user reviews.
Author: Yukie
Thanks For Coming To My Blog
Rating: 98% based on 988 ratings. 5 user reviews.
Author: Yukie
Thanks For Coming To My Blog
No comments:
Post a Comment